LIÊN HỆ: 0946.733.151 (MR DUY) 
PFXGP4401TADR. GP4000 Series Quantity: 1 Sản phẩm
  • Màn hình Proface PFXGP4401TADR

  • Price: Contact
USB (Type A) Display specifications
Display type 
Display size 
640 x 480 pixels (VGA)
Effective display area 
W153.7 x H115.8 mm [W6.05 x H4.56 in.]
Display colors 
65,536 Colors (No blink) / 16,384 Colors (Blink)
White LED (Not user replaceable. When replacement is required, contact your local distributor.)
Backlight service life 
50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%)
Brightness control 
16 Levels (Adjusted with touch panel or software)
Touch panel type 
Resistive Film (analog)
Touch panel resolution 
1,024 x 1,024
Touchpanel lifetime 
1,000,000 times or more
Language fonts 
Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable.)
Character sizes 
Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts
Font sizes 
Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1
8 x 8 dots 
80 char. x 60 rows
8 x 16 dots 
80 char. x 30 rows
16 x 16 dots 
40 char. x 30 rows
32 x 32 dots 
25 char. x 15 rows
1Other font sizes can be set up with the Editor software.
Electrical specifications
Rated input voltage 
24 Vdc
Input voltage limits 
19.2 to 28.8 Vdc
Allowable voltage drop 
5 ms or less
Power consumption 
3.4 W以下
In-rush current 
30 A or less
Voltage endurance 
1,000 Vac, 20 mA for 1 minute (between charging and FG terminals)
Insulation resistance 
500 Vdc, 10 MΩ or more (between charging and FG terminals)
Environmental specifications
International safety standards 

0 to 55 °C [32 to 131 °F]
Storage temperature 
-20 to +60 °C [-4 to 140 °F]
Ambient humidity 
10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] max. - no condensation)
Storage humidity 
10 to 90 % RH (Wet bulb temperature : 39 °C [102.2 °F] max. - no condensation)
0.1 mg/m3 (10-7 oz/ft3) or less (non-conductive levels)
Pollution degree 
For use in Pollution Degree 2 environment
Corrosive gases 
Free of corrosive gases
Air pressure (altitude range) 
800 to 1,114 hPa (2,000 m [6,561 ft.] above sea level or less)
Vibration resistance 
IEC/EN 61131-2 compliant
5 to 9 Hz single amplitude 3.5 mm [0.14 in.]
9 to 150 Hz fixed acceleration : 9.8 m/s
X, Y, Z directions for 10 cycles (approx. 100 min.)

Concussion resistance 
IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Noise immunity 
Noise Voltage : 1,000 Vp-p
Pulse Duration : 1 µs
Rise Time : 1 ns
(via noise simulator)

Electrostatic discharge immunity 
Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Application memory 
FLASH EPROM 32 MB (including a logic program area)
Data backup 
SRAM 320 KB (Replaceable Lithium battery for backup memory)
Logic program area 
FLASH EPROM 132 KB (Equivalent to 15,000 steps)*2
Variable area 
SRAM 64 KB (Replaceable Lithium battery for backup memory)
Clock accuracy 
±65 sec./month (deviation at room temperature and power is OFF)*3
2Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
3Depending on the operating temperature and age of unit, the clock can deviate ±300 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
Interface specifications
Serial (COM1) 
Asynchronous Transmission: RS-232C, Data Length: 7 or 8 bits, Parity: None, Odd or Even, Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 bps to 115,200 bps, Connector: D-Sub9 (plug)
Serial (COM2) 
Asynchronous Transmission: RS-422 / 485, Data Length: 7 or 8 bits, Parity: None, Odd or Even, Stop Bit: 1 or 2 bits, Data Transmission Speed: 2,400 to 115,200 bps, 187,500 bps (MPI), Connector: D-Sub9 (plug)

Conforms to USB 2.0 (Type A) x 1
Power supply voltage: 5 Vdc ±5 %
Output Current: 500 mA or less
Communication distance: 5 m [16.4 ft.] or less

USB (mini-B) 
Conforms to USB 2.0 (mini-B) x 1, Communication Distance: 5 m [16.4 ft] or less
IEEE802.3i / IEEE802.3u, 10BASE-T / 100BASE-TX, Connector: Modular jack (RJ-45) x 1
SD card 
SD Card Slot x 1
Structural specifications
Functional grounding: Grounding resistance of 100 Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard. (Same for FG and SG terminals)
Cooling method 
Natural air circulation
External dimensions 
W204 x H159.4 x D60.4 mm [W8.03 x H6.28 x D2.38 in.]
Panel cut-out dimensions 
Standard Mount: W155.3 x H117.4 mm [W6.11 x H4.62 in.]
Flat Mount: W174.5 x H134.2 mm [W6.87 x H5.28 in.]

1.4 kg [3.09 lb] or less
4Protection structure equivalent to IP67F can be expected if you affix the Overlay (sold separately) on the screen of the GP unit and the surroundings. Pro-face does not guarantee the protective structure. Consider the the protective structure in combination with a panel or a resin plate within your quality assurance range. For details, please refer to GP4000 Series Hardware Manual.
5As for dimensional tolerance everything +0.5/-0 mm (+0.02/-0 in.) and R in angle are below R1 (R0.04in.).
External dimensions 
Panel Type (Standard, Flat Mount) / Resin Boss Type (Standard Mount)

NOTE: All the above values are designed with cable bending in mind. The dimensions given here are representative values depending on the type of connection cable in use. Therefore, these values are intended for reference only.



  Reader Comments

0904 733 151
Bạn cần hỗ trợ?
You did not use the site, Click here to remain logged. Timeout: 60 second