Màn hình Proface PFXGP4501TAACÔNG TY TNHH KỸ THUẬT ĐIỆN HIỆP LỰC MÀN HÌNH CẢM ỨNG PROFACE LIÊN HỆ: 0946.733.151 (MR DUY) PFXGP4501TAAGP4000 SeriesQuantity: 1 Sản phẩm
MỌI NHU CẦU VỀ SẢN PHẨM HAY HỖ TRỢ KỸ THUẬT VUI LÒNG LIÊN HỆ TẠI ĐÂY
Resolution 640 x 480 pixels (VGA) Effective display area W211.2 x H158.4 mm [W8.31 x H6.24 in.] Display colors 65,536 Colors (No blink) / 16,384 Colors (Blink) Backlight White LED (Not user replaceable. When replacement is required, contact your local distributor.) Backlight service life 50,000 hrs. or more (each in continuous operation at 25 °C [77 °F] before backlight brightness decreases to 50%) Brightness control 16 Levels (Adjusted with touch panel or software) Touch panel type Resistive Film (analog) Touch panel resolution 1,024 x 1,024 Touchpanel lifetime 1,000,000 times or more Language fonts Japanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean, Traditional Chinese and Simplified Chinese fonts are downloadable.) Character sizes Standard font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 pixel fonts, Stroke font: 6 to 127 pixel fonts, Image font: 8 to 72 pixel fonts Font sizes Standard font: Width can be expanded up to 8 times. Height can be expanded up to 8 times.*1 8 x 8 dots 80 char. x 60 rows 8 x 16 dots 80 char. x 30 rows 16 x 16 dots 40 char. x 30 rows 32 x 32 dots 20 char. x 15 rows
1Other font sizes can be set up with the Editor software.
2Up to 60,000 steps can be converted in software. However, this reduces application memory capacity (for screen data) by 1 MB.
3Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
4The front face of this product, installed in a solid panel, has been tested using conditions equivalent to the standards shown in the specification.
5Regarding dimensional tolerance, everything +1/-0 mm [+0.04/-0 in.] and R in angle are below R3 [R0.12 in.]. Even if the installation wall thickness is within the recommended range for the "Panel Cut Dimensions", depending on wall's material, size, and installation location of GP unit and other devices, the installation wall could warp. To prevent warping, the installation surface may need to be strengthened.