Màn hình Proface PFXGP4311HTADER Màn hình Proface PFXGP4311HTADER
LIÊN HỆ: 0946.733.151 (MR DUY) 
PFXGP4311HTADE . GP4000 Series 0 đ Số lượng: 1 Sản phẩm
  • Màn hình Proface PFXGP4311HTADER

  • Giá: 0 đ

  • Bảo hành: 12 tháng
Global Code 
Product Features 
TFT Color LCD (65,536 colors) VGA
Repair Status 
(Repair service is available, reparable.)
Resolution640 x 480 Pixels (VGA)Dot PitchW0.18 x H0.18mm [W0.01 X H0.01in.]Effective Display Area115.2 x 86.4mm (4.54 x 3.4in)Display Colors65,536 Colors (No blink) / 16,384 Colors (Blink)BacklightWhite LED (Not user replaceable. When replacement is required, contact your local distributor.)Brightness Control16 Levels (Adjusted with touch panel)Contrast ControlNot ApplicableLanguage FontsJapanese: 6,962 (JIS Standards 1 & 2) (including 607 non-kanji characters), ANK: 158 (Korean fonts, Simplified Chinese and Traditional Chinese fonts are downloadable.Character SizesStandard Font: 8 x 8, 8 x 16, 16 x 16 and 32 x 32 Pixel Fonts, Stroke Font: 6 to 127 Pixel Fonts Font SizesStandard font: Width can be expanded up to 8 times., Height can be expanded up to 8 times. *18 x 8 Dots80 Char. x 60 Rows8 x 16 Dots80 Char. x 30 Rows16 x 16 Dots40 Char. x 30 Rows32 x 32 Dots20 Char. x 15 RowsApplication MemoryFlash EPROM 32MB *2Data BackupSRAM 320KB *2 *3Clock Accuracy±65 sec./month (deviation at room temperature and power is OFF) *4Touch Panel TypeResistive Film (Analog)Touch Panel Resolution1,024 x 1,024Touch Panel Service Life1 million times or moreInterface Serial (COM1)Asynchronous Transmission:RS-232C/RS-422/RS-485, Data Length: 7 or 8 bits
Stop Bit: 1 or 2 bits
Parity: None, odd, or even, Data transmission speed: 2,400 to 115,200bps, 187,500bps (MPI)
Maximum Communication Distance 
When using RS-232C: 15m (49.2ft)
When using RS-422 at 115,200bps : 1,200m (3937ft)Ethernet (LAN) IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX Connector: Modular Jack (RJ-45) x 1
Maximum Communication Distance 
*5: 100m (328.1ft)USB (Type-A) Conforms to USB2.0 (TYPE-A) x 1, Power Supply Voltage: DC 5 V ±5 %, Output Current: 500mA or less, Communication Distance: 5m [16.4ft.] or lessUSB (Type mini-B) Conforms to USB2.0 (mini-B) x 1, Communication Distance: 5m [16.4ft.] or lessCF Card-SD CardSD Card Slot x 1Function Switch12 Switches (Right: 6 Switches, Left: 6 Switches) (DOUT: 2 Open Collector Output [F1, F2], Operation Switch: 1 Open Collector Output [O.P])Emergency Switch OutputPush-lock Switch, 3 Contacts (A-contact: 1 Contact, B-contact: 2 Contacts), Rated Voltage: DC 30V, Maximum Rated Current: 1A, (Minimum Allowable Load: DC 5V, 1mA), Applicable Standards *6: IEC/EN60947-5-1, IEC/EN60947-5-5, UL508, CSA C22.2 No.143-Position Enable Switch OutputGP Rear Panel Switch, 2 Contacts (A-contact), Rated Voltage: DC 30V, Maximum Rated Current: 700mA (Minimum Allowable Load: DC 3V, 5mA), Applicable Standards *6: IEC/EN60947-5-8, 60204-1, UL508, CSA C22.2 No.14, ISO12100/EN12100-1,2, ISO11161/prEN11161, ISO10218/EN775, ANSI/RIA R15.06, ANSI B11.19Key Switch Output1c-Contact, Rated Voltage: DC 24V, Maximum Rated Current: 300mAExternal *7Operation OutputOpen Collector Output: 1 Point, Rated Voltage: DC 24V, Maximum Rated Current: 300mAExternal Buzzer OutputOpen Collector Output 1 Point, Rated Voltage: DC 24V, Maximum Rated Current: 300mADOUT OutputOpen Collector Output: 2 Points [F1, F2], Rated Voltage: DC 24V, Maximum Rated Current: 300mA/point

General Specification
International Safety Standards https://www.proface.com/sites/default/files/ul_61010.gif   https://www.proface.com/sites/default/files/safetymark_ce.gif   https://www.proface.com/sites/default/files/safetymark_kc.gif   https://www.proface.com/sites/default/files/icon_files/eac.gif   https://www.proface.com/sites/default/files/safetymark_ctick2.gif
Rated Input Voltage 24Vdc 
Input Voltage Limits DC 19.2 to 28.8Vdc 
Allowable Voltage Drop 10ms or less
Power Consumption 12W or less (When power is not supplied to external devices: 8W or less)
In-Rush Current 35A or less
Voltage Endurance 500Vac, 20mA for 1 minute (between charging and FG terminals)
Insulation Resistance 500Vdc, 10MΩ or more (between charging and FG terminals)
Surrounding Air Temperature 0 to 40°C (32 to 104°F) 
Storage Temperature -20 to 60°C (-4 to 140°F)
Ambient Humidity 10% to 90% RH (Non Condensing, Wet Bulb Temperature 39°C [102.2°F] or less)
Storage Humidity 10 to 90% RH (Wet Bulb Temperature: 39°C max. - No condensation.)
Dust 0.1 mg/m3 (10-7 oz/ft3) or less (Non-conductive Levels)
Pollution Degree For use in pollution degree 2 environment
Atmosphere Free of corrosive gases
Air Pressure (Altitude Range) 800 to 1,114hPa (2,000m [6,561ft] or lower)
Vibration Resistance IEC/EN 61131-2 compliant 5 to 9Hz Single amplitude 3.5mm (0.14 in.)
9 to 150Hz Fixed acceleration: 9.8m/s
X, Y, Z directions for 10 cycles (Approximately 100 Minutes)
Shock Resistance IEC/EN 61131-2 compliant 147m/s2, X, Y, Z directions for 3 times
Noise Immunity Noise Voltage: 1,000Vp-p
Pulse Duration: 1ms, Rise Time: 1ns (via noise simulator)
Electrostatic Discharge Immunity Contact Discharge Method: 6kV (IEC/EN 61000-4-2 Level 3)
Drop Resistance IEC 61131-2 Compliant 1.0m [3.3ft] Drop - 2 Times
Grounding Functional Grounding: Grounding resistance of 100Ω, 2mm2 (AWG 14) or thicker wire, or your country's applicable standard (same for FG and SG terminals).
Structure *8 IP65F
Weight Approx. 910g (2.01lb) or less: without a key switch, unit only
960g (2.12lb) or less: with a key switch, unit only
*1Other font sizes can be set up with the Editor software.
*2Amount of memory you can use differs depending on your screen editing software.
*3Rechargeable lithium battery for backup memory.
*4Depending on the operating temperature and age of unit, the clock can deviate from -380 to +90 sec./month. For systems where this level of deviation is a problem, the user should monitor and make adjustments when required.
*5When using the Conversion Adapter (model number: AGP3000H-ADPCOM-01), the distance includes the cable length between this product and the Conversion Adapter.
*6Overall system may not meet these standards if implemented outside these parameters. Follow these standards when designing the system.
*7The conversion adapter is required to use the external output interface (DOUT) and build a system.adapter.
*8This product has been tested using conditions equivalent to the standards shown in the specification.
External dimensions 
Models with an Emergency Stop Switch or Stop Switch
  1. Front
  2. Left
  3. Bottom
 Models without any Stop Switch
  1. Front
  2. Left
  3. Bottom
 Dimensions with a Stop Switch Guard
  1. Front
  2. Left
  3. Bottom
Conversion Adapter

Parts Identification
GP4000H unit

(A) Emergency stop switch / Stop switch (B) Status LED (POWER) (C) Operation LED (O.P.) (D) Operation switch (E) Function switches


(F) Maintenance cover (G) Key switch (H) USB (Type A) interface (I) SD card slot (J) USB (mini-B) interface

[Right and Rear]


(K) 3-position enable switch (L) Neck strap attachment slot (M) Hanger (N) SD card access LED (O) Touch pen (P) Wall hanging adapter attachment slots (Q) Hand strap attachment slots (R) Insertion hole (with cover) for function switch sheet (S) Interface for direct-connect cable (with connector cover)
Conversion Adapter

(T) Ethernet Interface (U) Connector Cover (V) Serial Interface


  Ý kiến bạn đọc

0904 733 151
Bạn cần hỗ trợ?
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây